Single Cartridge Mechanical Seal CS-100
The CS-100 Series single cartridge mechanical seal provides supreme reliability in aggressive chemical, hydrocarbon, and general industrial pumping operations. Pre-set at the factory with integrated gland plate and sleeve, it minimizes installation downtime and eliminates human error during setting.
Available Materials
Applies To
Technical Specifications
| Shaft Diameter Range | 24mm to 100mm (1.000" to 4.000") |
| Operating Pressure | Full vacuum up to 25 bar (360 PSI) |
| Operating Temperature | -40°C to +220°C (-40°F to 428°F) |
| Sliding Velocity | Up to 25 m/s (5000 FPM) |
You Might Also Need
Seal Type 11 / 12 / 13 - Rubber Bellow
Unbalance Pusher Inside Mounted Rubber Bellow Seal. Independent Direction of Rotation.
Seal Type 21 - Rubber Bellow
Unbalance Pusher Inside Mounted Rubber Bellow Seal. Independent Direction of Rotation.
Seal Type 31 - Conical Spring
Unbalance pusher inside mounted conical coil Spring mechanical seal. Secondary seal as O' ring. Independent direction of rotation with Central tapered spring.
Need More Information?
Our technical team can provide detailed specifications, custom dimensions, and engineering recommendations tailored to your exact application.
Contact Technical TeamNeed the Right Pump Component or Mechanical Seal?
Share your pump model, operating parameters, or component drawing with our technical team to receive tailored engineering guidance and a fast quotation.